Do You Know That Efficient Air Conditioner Filters Require Frequent Maintenance?

If Your Air Conditioner Filter Is The Efficient Type You Should Make Frequent Checkup, Clean Or Replace It For Optimum Performance. Your Air Conditioner filter will have a lot of job to do if you have a filthy indoor air. If your Air Conditioner is fitted with a quality filter, but you fail to keep it clean, you may still get the coolness or heat but your indoor air hygiene will be next to nothing, and thus expose you and your family to air borne health risks.

If on the other hand your Air Conditioner is fitted with economy panel filters from your local hardware store, because they come cheap, you are not doing yourself, your family or your air conditioning equipment any good. An Air Conditioner filter that does not do the job is worse than no air filter at all.

Do you know that the economy panel filters are so useless you could leave one in your air conditioner for a year and it would not gather sufficient dust to necessitate cleaning or changing? The worse of what these good for nothing filters will do, instead of cleaning your indoor air, is make dirty the evaporator coil of your air conditioner. You will have to clean the evaporator regularly to remove the dirt that should have been stopped by the filter.

Friend, you can see that the only way to get your Air Conditioner to do the three functions of cleaning, cooling and heating is to ensure that it is installed with the best air filter for the mutual good of you and your Air Conditioner.

Continue reading...

Water Treatment Supply Middle East

Did you know that if you have well water, you have to get it tested on a regular basis? There are so many people who end up getting sick because of water contamination and they don’t even know it. In fact, 26% of all well waters can cause people to become sick. Although your well is not a public system, most states will have laws on the books about wells. Before you purchase a home with a well or drill a well, you should see what your state laws are. It is completely up to you to make your water safe, so take that in consideration as well.

You should have your water tested in the springtime. This way you can see what the winter has placed in your well system. Not only should you test in the spring, but also you need to test your water at least once every two years for changes in chemicals or mineral compounds. You should always test your water if there are any disturbances, like mining near you, or if you are in a flooded area. You will not only need to test your water, but repair or re-drill a well to fix the problem.

You can get your water tested at any of you local environmental laboratories. You may be surprised, but anything can cause a change in your well water, including the animals that inhibit your local area. You will not only need to get a water filtering system, but you should also keep in mind about your septic system.

You will not want your well next to your septic system or anywhere near it. You may want to have them at opposite sides of the house so that you have no worries about a leak getting into your water. Some of the things that you will end up testing for to make your drinking water taste better, as well as, be healthier for you are Coliform, E. Coli, Nitrate, VOC (Volatile Organic Compounds), and pH.

If you think that your water has a weird or different smell or taste, you should get your water tested as soon as possible. Not only will testing the water save you from illness, but it will also taste better. Once you have pinpointed what is in your water, you can remove or reduce the amount of containments and then you can improve your water’s drinking quality and characteristics.

Continue reading...

Table Saws for All Levels from Craftsman

Craftsman is a brand name made exclusively for Sears. Wood working tools were added to their line of power tools in 1926. Several companies actual have made the tools for the brand name. You can tell which company made the tool based on the prefix of the model number on the older tools. Craftsman offers several table saws in varying sizes and prices to fit the needs of numerous customers.

1. 10-inch table saw with stand-This is the smallest model Craftsman offers in a table saw. This model has a smaller 13-amp motor. The stand is not portable and is to prevent wobbling. The miter gauge has preset stops for the most common angle cuts. This basic model is priced right for the homeowner who does occasional hobby work at a cost of $120.

2. 10-inch portable table saw-This Craftsman table saw has a collapsible stand with wheels for easy moving from one job site to another. Crosscuts are smooth with a built-in miter gauge on the sliding miter table. Rip cuts can be a 30-inch right or a 7-inch left on the sliding rails. This model has a 15-amp motor, on-board storage, dust port and collection bag, and 1/32 scale for accurate measurements on the rails. This model costs around $270.

3. Professional portable 10-inch table saw-For the professional who has more work to get done, this Craftsman table saw is sturdier for that heavier use. The rip capacity is increased to a 33-inch right and a 30-inch left. This model also has the sliding miter table, but its miter fence is oversized. It has a built-in router table and mounting kit for a later addition of a router if you want that extra. The tabletop with the extensions out is 48"X32". This professional model sells for $450.

4. 10-inch stationary table saw with wooden extension and tilt arbor-Moving up in capacity, Craftsman table saw model #22805 has a large 76"X27" table with the extensions all the way out. Weighing 537 pounds, this model is not meant to be portable, but it is meant to be a heavier duty ripping saw. It comes complete with a miter, rip fence, and tilting arbor. Regular price is $1300.

5. 12-inch stationary table saw with wooden extension and tilt arbor-This model is similar to the previous heavier duty table saw except that it has a 12-inch blade. Two versions are offered for your convenience: one has a left-tilt arbor, and the other has the right-tilt arbor. The tabletop is a little larger than the previous model, stretching out to 81"X30". Of course, as the workload capacity increases so does the price. This model comes in at a regular price of $1600.

Craftsman offers several other table saws that come between these small, medium, and large models. One is sure to meet your workload needs and budget.

Continue reading...

Is A Tankless Water Heater The Best Choice for Your Home?

If you are interested in upgrading your current water heater system then be prepared to find many options to choose from on the market. Many of the newer models allow consumers the ability to heat the water they use in their home quickly, efficiently, and to always have plenty of hot water on demand. Before you rush out to purchase a tankless water heater take your time to make sure it is right for your home. It is an investment that is quite expensive so don’t do it if the benefits aren’t going to come with it.

The most popular style of new water heaters on the market is the tankless water heater. It is very popular because it doesn’t take up very much space at all. This can save you a great deal of valuable storage room compared to other models of water heaters that are available. They also tend to have many fewer problems with them than other types of water heating systems.

A tankless water heater system operates by using a line or pipe. Hotels and businesses have been using this type of design for years as it allows hot water to quickly reach the outlet. This is because the user doesn’t have to wait for the tank to refill and then for the water to heat up as is the case with traditional tank water heater systems. A tankless water heater system allows you to have the hot water you want on demand without any hassles.

The price of a tankless water heater system keeps many consumers from making the purchase. They are fairly new to the market and have only started being offered to consumers who aren’t of a commercial nature. The prices are still pretty high, about 9 times more than a traditional water heater system. This is definitely enough of a price difference to affect one’s budget.

Another concern with tankless water heaters is that they tend to offer a lower temperature than traditional water heaters. This is because the water is flowing through the heating department without being heated to a particular temperature. This can leave the water at a lower temperature than some people are happy with.

A tankless water heater system is much more energy efficient because it isn’t continuously running. This is a major selling point and helps to justify the initial purchase price of the system. You will save money on your monthly energy bill when you switch from a traditional water heater system to a tankless water heater system.

Continue reading...

Living In The Country Could Mean You Need A Well Water Treatment System

Living in the city, means you have a water supply from a water treatment plant. Living in the country, you rely on a well for your water supply to the home. In rural areas, a well could be dug 90 foot, 150 foot, or even 400 foot into the ground, for a water supply to be reached for your home. Well water does require continued testing, at least every few years, to determine if your water is safe, and of a quality type.

Depending on the particular housing set up, you water could come from the well to a holding tank in the home, or a holding tank outside underground near the home. Additionally, along with wells, many homes in rural areas depend on springs and holding areas for water for all their personal water needs. All of these situations require different types of water treatment, for the best possible water quality.

Lead can be a very risky situation in the home, and can be found in water. Lead leads to problems for children and adults, with situations causing high blood pressure, certain types of cancer and anemia as well as mental deficiencies. A simple water test, that you can complete yourself, is going to tell you if your well water is high in lead. A well water treatment system can lower the levels of lead in the water.

Additionally a well water treatment system can lower the levels of salt, heavy metals, iron and herbicides or pesticides in the water. If you live in a rural area, or with a water supply near an abandoned mine, you may test your water and find various contaminants that could be hazardous to you and your families health. A well water treatment system can put your mind at ease, so you are controlling what you are putting into your body and lowering the potential health hazards.

A well water treatment system in a holding area could include the use of a UV light to kill algae or bacteria in the water. A well water treatment system could include the use of treating the water in the home, before it is dispersed anywhere in the home using a salt treatment method, chlorine treatment or a filtration system, depending on what you find when you test the water from your well.

A well water treatment system is designed not only to treat those problems you are faced with right now in your well, but also a variety of potential hazards that could arise in the future. For example, with bacteria, you prevent typhoid, dysentery, and gastrointestinal problems associated with bacteria. With high salt and nitrogen in the water, a well water treatment system is going to prevent an ongoing poisoning in the household. Radon is also found in the water, and when entering the house through your well water, and then into the air, you would never even realize it until it is too late. Controlling all of these instances and problems is completed with the use of a well water treatment system.

Continue reading...